(Om de opgevraagde informatie op te halen wordt u doorgelinkt naar het Engelstalige gedeelte. Sluit deze om weer terug te keren naar DEHN.NL.)
DEHNshield®
 DEHNshield®, Dé juiste combi afleider voor toepassing in LPL3 en LPL4
- Vonkbrug gebaseerde bliksemstroom- en overspanningafleider
- Ideaal voor toepassing in woonhuizen
- Beveiliging van eindapparatuur
- Afleidvermogen 50 kA (10/350)
- Toestand monitoring inclusief status en fout indicatie door middel van zichtvenster.
|
Wiring Accessories STAK 25
 STAK 25: Pin-shaped terminal for EMC-optimised through-wiring of lightning current and surge arresters in accordance with DIN VDE 0100-534
- STAK 25 allows EMC-optimised through-wiring according to IEC 60364-5-53
- STAK 2X16 allows to connect cross sections that are smaller than the specified minimum terminal cross section of the surge protective device
Detailed technical information
|
SFL-Protector Surge protective multiple socket outlet
 SFL-Protector Surge protective multiple socket outlet with filter
- Surge protection with monitoring device and disconnector
- Interference suppressor filter
- Enhanced safety due to distinctive Y protection circuit
- Mains switch with operating state indication
- Visual fault indicator (red)
Detailed technical information
|
DEHNsecure M
 Single-pole, modular, coordinated lightning current arrester for d.c. applications
- Coordinated spark-gap-based lightning current arrester consisting of a base part and plug-in protection module
- Spark gap technology particularly suited for use in d.c. circuits * Discharge capacity up to 25 kA (10/350 µs)
- Directly coordinated with DEHNguard surge protective devices without additonal cable lengths
- Low voltage protection level
- Operating state/fault indication by indicator flag in the inspection window
- Easy replacement of protection modules due to module locking system with module release button
Detailed technical information
|
DEHNguard® M... CI with integrated backup fuse
 Modular surge arrester with integrated backup fuse
- Arrester backup fuse integrated in the protection module
- Prewired complete unit consisting of a base part and plug-in protection modules
- Energy coordination within the Red/Line product family
- High discharge capacity
- High reliability due to ''Thermo Dynamic Control'' SPD monitoring device
- Easy replacement of protection modules without tools due to module locking system with module release button
Detailed technical information
Brochure PDF [550 KB]
|
DEHNbloc® DBH M 1 255
 Single-pole, modular lightning current arrester with high follow current limitation for UC = 255 V
- Encapsulated, non-exhausting creepage discharge spark gap
- DEHNbloc ... H: RADAX Flow spark gap technology with high follow current limitation
- Energy coordination within the Red/Line product family
- High insulation resistance allows installation even upstream of meter panels
- Multifunctional terminal for connecting conductors and busbars
- Single-pole and three-pole version (lightning impulse currents up to 100 kA depending on the system configuration)
- ''NH00'' version available
Detailed technical information |
DK25 Feed-through terminal for busbar wiring
- DK 25 allows to change the wiring level
- DK 25 supports lightning-impulse-current-conform installation of SPD combinations
Detailed technical information |
DEHNbloc Maxi NH00 255
 Coordinated single-pole lightning current arrester in NH design, size 00, with high follow current limitation for UC = 255 V
- Encapsulated RADAX Flow spark gap with high follow current limitation
- Voltage protection level ≤ 2,5 kV
- Lightning impulse current: 25 kA (10/350)
Detailed technical information |
Multipole and single-pole arrester for use in photovoltaic systems with three-step d.c. switching device