Loading
Combined surge protective adapter for plugging into Schuko socket outlets, with visual operating state and fault indication.
Loading
Visual operating state and fault indication of the power side (230 V).
Loading
Version with coaxial connection.
Loading
Plug for earthed socket outlets for protecting the power side.
Loading
Version with RJ connection.

DEHNprotector – Combined Adapter

Combined surge protection for the power and data side of terminal equipment
Protection of TVs and satellite devices, telephone and Ethernet components
Visual operating state and fault indication
Easy retrofitting by means of simple installation

DPRO 230 TV

Combined surge protection for the power and antenna side of television, radio or satellite receivers. With visual operating state and fault indication and an integrated child lock.

Art.-Nr. 909300

DPRO 230 TV

item

Protection for the data side
SPD class	B
Max. continuous operating voltage DC (U_C)	60 V
C2 Nominal discharge current (8/20 µs) line-shield (PE) (I_n)	5 kA
Insertion loss 0-2400 MHz	≤ 1.5 dB
Connection (input / output)	F socket / F socket
Protection for the power side
SPD according to EN 61643-11 / IEC 61643-11	type 3 / class III
Max. continuous operating voltage (AC) (U_C)	255 V (50 / 60 Hz)
Total discharge current (8/20 µs) [L+N-PE] (I_total)	5 kA
Voltage protection level [L-N] (U_P)	≤ 1.35 kV
Max. mains-side overcurrent protection	16 A gL/gG or B 16 A

DPRO 230 NT

Combined surge protection for the power and data side of a digital network termination (NT) (IP telephony), especially telecommunication interfaces up to VVDSL and G.fast (up 1 Gbit/s). With visual operating state and fault indication and an integrated child lock on the power side.

Art.-Nr. 909310

DPRO 230 NT

item

Protection for the data side
SPD class	Q
Max. continuous operating voltage DC (U_C)	180 V
D1 Lightning impulse current (10/350 µs) per line (I_imp)	1 kA
C2 Nominal discharge current (8/20 µs) per line (I_n)	2.5 kA
Cut-off frequency (f_G)	220 MHz
Connection (input / output)	RJ12 socket / RJ12 socket
Protection for the power side
SPD according to EN 61643-11 / IEC 61643-11	type 3 / class III
Max. continuous operating voltage (AC) (U_C)	255 V (50 / 60 Hz)
Total discharge current (8/20 µs) [L+N-PE] (I_total)	5 kA
Voltage protection level [L-N] (U_P)	≤ 1.35 kV
Max. mains-side overcurrent protection	B 16 A

DPRO 230 LAN100

Combined surge protection for the power side and the data input for the protection of LAN components. Protective circuit for all wire pairs for Ethernet pin assignment.
Meets the requirements for channel class D in accordance with EN 50173 and is thus suitable for 1000 Base-T (Gigabit Ethernet).
With visual operating state and fault indication and an integrated child lock.

Art.-Nr. 909321

DPRO 230 LAN100

item

Protection for the data side
SPD class	Q
Max. continuous operating voltage DC (U_C)	3.3 V
D1 Lightning impulse current (10/350 µs) per line (I_imp)	0.5 kA
C2 Total nominal discharge current (8/20 µs) (I_n)	10 kA
Cut-off frequency (f_G)	180 MHz
Connection (input / output)	shielded RJ45 socket / shielded RJ45 socket
Protection for the power side
SPD according to EN 61643-11 / IEC 61643-11	type 3 / class III
Max. continuous operating voltage (AC) (U_C)	255 V (50 / 60 Hz)
Total discharge current (8/20 µs) [L+N-PE] (I_total)	5 kA
Voltage protection level [L-N] (U_P)	≤ 1.25 kV
Max. mains-side overcurrent protection	B 16 A